The RØDE NTK microphone is designed and made in Australia, and covered by RØDE Microphones' industry leading 10 year warranty. He is also replacing the Jenson transformers in NTV's with a custom-wound transformer of his own design, which doesn't seem like a very good idea to me. My guess is that it will still sound great 40 years from now. RØDE NTK Cardioid Tube Condenser Microphone. It is however advised that where possible, to turn off phantom power when not in use. I did a Google search for "Rode NTV mods" and came up with a guy that was replacing caps in NTK's. All rights reserved. Low noise, sound quality and of course long life are taken into consideration with every design and subsequent tube selection. Rode NT1A Mods. Both the NT1000 and NTK are examples of excellent efforts from RØDE. There are many web sites and vendors for NOS tubes and they supply lots of information. To find out, you will need to experiment and that can be expensive but of course the choice is yours if you wish to experiment. Rode NTK Mods. There is quite a lot of mythology surrounding tubes with wild claims being made. What tubes do you use in your microphones? We choose our tube type carefully to allow us to have enough stock to manufacture in the quantites required to satisfy our customers whilst keeping the mic characteristics constant and to ensure support for the product for many years to come. Let's be honest, most well known microphone brands trade on their name.I have auditioned most brands out there, and can say with the greatest of confidence that you dont have to spend $7000 to get a good sound. What a great mike - not just for the money. Rode NT1 Mods. Based on specs and clearly audible quality of sound in the studio, these mics cannot be ignored. The original Rode NT1 uses a circuit based on the Schoeps transformerless design. Is the 7 pin cable between the PSU and the K2/NTK mic a standard cable or is it unique to RØDE? All tubes are microphonic to a certain degree. The cable is pin to pin. I love to create sounds using two microphones of different make and model in a stereo field, but almost always the NTK is included. Replace the stock tube with the new tube using a … No, whilst these power supplies do not require phantom power, they are built to cope with being fed phantom power and this will not damage the equipment. RØDE NTK Cardioid Tube Condenser Microphone. We think the Rode NTK microphone is pretty nice. It's important to point out that the capsule and it's housing or "head basket" is the … Ensure the microphone is not powered, and that you are grounded before touching any circuitry. That means if you tap them when in circuit you will hear that sound in your signal. Where can I buy replacement tubes for my RØDE microphone? It sounds much like a combination of the U47 and U67 once modded. The Rode NT1-A introduced significant changes to the original NT1's architecture: surface-mount electronics, IC-based DC circuitry, and an edge-terminated capsule. When transistors started to take over, the demand for premium and high specification tubes started to decline to the point where none of the high end producers in the US, Germany or UK were viable and so their production ceased. Circuit Mods for the NT1. NT1A Capsule Replacement After trying several other high quality dynamic and condenser mics first the NTK was the one that brought the proper balance of articulation, low end, and warmth to the track. Use that screw to attach the modified supersaddle to the Rode mounting post. We test for noise, microphonics and output. Where can I find more information on tubes?