Your password reset link is on its way. Great for straight shearing, tight Patterns cuts, corner cuts, or navigating profiles. but some manufacturers require that we only show these low prices once you take further action. This item is for non-potable (non-human consumption) water applications only. The shear’s wide-opening jaws can operate at high or low speeds for the control you need, when you need it. If you have problems accessing your account, please contact us at 1-888-757-4774 and we'll help you out. 14080 State Highway 55 NW Good Friday – Friday, April 10, 2020 * Free slots for orders with water heaters, boilers and other bulky items only. They are well made, stand up and last. Privacy Policy. Christmas Eve Holiday – Tuesday, December 24, 2020 TSHD – The clearance between the cutting jaws is adjustable in order to achieve the optimum cut for thick or thin material. Inventory also stocked at our Luxembourg warehouse. Speak with a real person who will go out of their way to help! Please contact us with any questions: I've had mine for several years now and have used them extensively and I do not have one complaint. Be among the first to learn about new products special offers and/or participate in surveys and testing. Do not use this item for any installation or repair of potable water applications. You must agree to this statement in order to purchase this product. For product availability in your area, please verify your zip code. Thanksgiving Day – Thursday, November 26, 2020 18-gauge galvanized steel. English, French, Italian or Spanish. jQuery('.menu-item-33768').click(function() { New Year’s Day – Wednesday, January 1, 2020 E: [email protected] On orders over $99. A sleek, lightweight aluminum cast shear head and molded drill clamp allow maximum portability. The TSHD is also rated to cut 20-gauge (.82 mm) spiral duct work. We try to always offer you the lowest prices possible, TSHD – The Turboshear Sheet Metal Cutter will make clean cuts throughout the range of thicknesses of material listed above. I understand that once I order this item I cannot cancel or return it. Long lasting blades also easily replaceable. Memorial Day – Monday, May 25, 2020 Optional spacers are stored on the clamp for large motor housings. }); This product must be installed by a qualified/licensed contractor and set up with properly calibrated combustion test equipment. Please check the box below to confirm you are aware that this item is for non-potable water applications only. Labor Day – Monday, September 7, 2020 jQuery('body').on('click', '.ps-online-seller-button', function() { Turn it clockwise to tighten the gap of the jaws for thinner material or counterclockwise to make the gap of the jaws larger for thicker material. At this time, we do not carry this unit. When you order this item, we then special order it for you from the manufacturer. The Malco TurboShear Heavy Duty (TSHD) is a powerful sheet metal cutting tool that can be quickly inserted into the chuck of a corded or cordless drill. fbq('trackCustom', 'Where to Buy Click'); TSHD – cuts 18-gauge (1.32 mm) galvanized steel (HVAC duct work, auto body panels), 20-gauge (.82 mm) non hardened carbon steel and stainless steel (metal roofing panels), 14-gauge (1.54 mm) aluminum (trim coil, flashing), and .100 inch (2.55 mm) copper (metal roofing, gutters). PO Box 400 Failure to comply with this could result in substantial property damage, severe personal injury or death. and I hold a valid Gastite/FlashShield certification card. }); Stefano Mariani FlashShield is to be installed only by a licensed plumber/HVAC installer that has successfully completed the Gastite/FlashShield certification test. jQuery('.product__buy .ps-widget').click(function() { 320-274-7387 This product will NOT be used in the installation or repair of a potable water (human consumption) application. Independence Day (Day Before) – Friday, July 3, 2020 Manufacturer's warranty still applies. How do you adjust the tool to get the optimum cut? 1-800-328-3530 Keep in touch with us! Drill Requirements: Min 1/4 in (6.35mm) Chuck, Min 14.4 V-DC/Max 7 A-AC. *Compatible with all current and pre-existing Malco TurboShears in the market. }); jQuery(document).ready(function(){ To adjust, locate the 3/16” set screw on the back of the tool, towards the front of the tool near the jaws. The rugged TurboShear HD cuts Annandale, MN 55302-0400. If you have a new product idea, Malco would like to hear about it! By checking this box I am verifying that this product will be installed by a qualified/licensed contractor and will be set up with properly calibrated combustion test equipment. This field is for validation purposes and should be left unchanged. straight and to the left and makes There is a Minimum Advertised Price (MAP) allowed by the manufacturer on this product. Free Shipping }); This item is cost-prohibitive to ship on its own but is available to ship with orders over $200.