If you belong to an institution that sets its own citation guidelines, use those instead. Those improved properties include … Some forms can be used as high-speed steel. How does it compare to other metal alloys? Chromium also helps resist abrasion, oxidation, and corrosion. It is hard but easy to bend and cut. If you belong to an institution that sets its own citation guidelines, use those instead. The properties of SAE-AISI 6150 steel include three common variations. "SAE-AISI 6118 (G61180) Chromium-Vanadium Steel", www.makeitfrom.com/material-properties/SAE-AISI-6118-G61180-Chromium-Vanadium-Steel, retrieved 2020-11-29. Ranges represent what is permitted under applicable standards. It has the highest embodied energy among the SAE-AISI wrought steels in the database. It has good corrosion resistance, high strength at high temperature, and low density. It’s a similar alloy steel to 5150 steel with small, but effective, vanadium addition, to import greater hardness. ASTM 6150 steel is usually It has the highest embodied energy among the SAE-AISI wrought steels in the database. Buy AISI 6150 bolts, nuts and other fasteners from Boltport, an Indian manufacturer & supplier of AISI 6150 bolting materials to ASTM B446, B564, F467, F468, UNS N06600, DIN EN 2.4856, AMS 5666 and BS 3076 specifications with properties adequate for high strength, corrosion resistant and high temperature applications up to 1000º C (1800º F). 1.1 This specification covers the highest quality of round and shaped chromium-vanadium alloy steel valve spring wire, uniform in quality and temper, intended for the manufacture of valve springs and other springs requiring high-fatigue properties when used at moderately elevated temperatures. Chromium and vanadium both make the steel more hardenable. This steel is tempered followed by normalizing at 899°C (1650°F) and then air cooled. The graph bars on the material properties cards further below compare SAE-AISI 6150 steel to: SAE-AISI wrought steels (top), all iron alloys (middle), and the entire database (bottom). It has a moderately low tensile strength and a moderately high embodied energy among SAE-AISI wrought steels. The SAE 6150 steel grade is suitable for oil hardening and tempering. How does SAE-AISI 6150 steel compare to other iron alloys? Among alloy steels, the composition of SAE-AISI 6118 steel is notable for including vanadium (V). The graph bars on the material properties cards below compare SAE-AISI 6118 steel to: SAE-AISI wrought steels (top), all iron alloys (middle), and the entire database (bottom). A half-full bar means it's 50% of the highest, and so on. The most commonly used grades of Alloy Bar: Grade 4140 – Chromium Molybdenum Steel; Grade 4340 – Nickel-Chromium-Molybdenum Steel 0,20% of Vanadium: Improves wear resistance and hardenability. 6150 is the designation in both the SAE and AISI systems for this material. This page shows summary ranges across all of them. The graph bars on the material properties cards below compare SAE-AISI 6118 steel to: SAE-AISI wrought steels (top), all iron alloys (middle), and the entire database (bottom). AISI 6150 alloy steel can be welded using any common welding methods. Electrical Conductivity: Equal Weight (Specific). Chromium; Molybdenum; Vanadium; Manganese; Nickel; Chromium Chromium. G61500 is the UNS number. At this percentage and greater, the corrosion resistance of a steel vastly increases and oxidation of the iron is prevented in many conditions. Improved corrosion resistance. For more specific values, follow the links immediately below. It is similar to the grade VD (referenced in EN 10270-2) intended for high fatigue levels. It has a moderately low tensile strength and a moderately high embodied energy among SAE-AISI wrought steels. Vanadium – Increases strength, toughness and shock resistance.